Swarovski Around the World – India

India Earring’s

Swarovski Crystals

Product Group Article No. Amount Size Color Color Code
Pendants 6010 10 pcs 13×6.5mm Fuchsia 502
Beads 5000 4 pcs 6mm Fuchsia 502
Beads 5328 4 pcs 4mm Fuchsia 502
Beads 5040 8 pcs 6mm Light Topaz 226
Beads 5328 4 pcs 4mm Light Topaz 226
Beads 5040 8 pcs 6mm Indicolite 379
Beads 5328 4 pcs 4mm Indicolite 379

Supplies:

4 – Hourglass 2 Hole Links – TierraCast® 94-3074-25

2 – Large Open Lotus – TierraCast® 94-3210-26

12” – 20g Artistic Wire®

2 – Ear Wires

16 – medium jump rings

Instructions:

Step 1:  Cut the wire into four 6” pieces and set aside.

Step 2:  Using 5 jump rings attach 5 of the 6010 Fuchsia pendants to the bottom holes in the Open Lotus.

Step 3:  Using one piece of wire make a simple loop.  Attach to the top left hole in the Open Lotus.  Slide on one 6mm 5040 Indicolite bead, one 4mm 5328 Lt Topaz bead, one 6mm 5040 Indicolite bead.  Slide wire through the left hole of a Hourglass link, then slide on one 6mm 5040 Lt Topaz bead, one 4mm 5328 Fuchsia bead, one 6mm 5040 Lt Topaz bead. Slide wire through the left hole of a second Hourglass link, then slide on one 6mm 5000 Fuchsia bead and one 4mm 5328 Indicolite bead and make a simple loop.  Repeat for the right side of the Open lotus. 

Step 4:  Using three jump rings make a chain attaching one end to the left of the top of the earring and the other end to the right side of the earring.  Find the middle of the jump ring chain and attach an ear wire.

Step 5:  Repeat Steps 2 – 4 to make second earring.

India Necklace

Swarovski Crystals

Product Group Article No. Amount Size Color Color Code
Pendants 6010 4 pcs 13×6.5mm Fuchsia 502
Beads 5000 14 pcs 6mm Fuchsia 502
Beads 5328 22 pcs 4mm Fuchsia 502
Beads 5328 10 pcs 6mm Light Topaz 226
Beads 5328 30 pcs 4mm Light Topaz 226
Beads 5040 23 pcs 8mm Indicolite 379
Fancy Stone 4327 1 pc 30x20mm Fuchsia F 502
Fancy Finding 4327/J 1 pc 30x20mm Gold  

Supplies:

2 – Hourglass 2 Hole Links – TierraCast® 94-3074-25

1 – Large Open Lotus – TierraCast® 94-3210-26

22” – Beading wire

2 – 1” headpins

14 – medium jump rings

1 – Medium lobster clasp

2 – 2mm crimp beads

2 – 3mm crimp covers

Alcohol wipes

Swarovski CG500 two-part epoxy glue

Instructions:

Step 1:  Using alcohol wipes clean all off the drop setting and set aside to dry.

Step 2:  Using one 4327 Pear fancy stone glue into matching finding. Set aside to dry for 24 hours.

Step 3:  Using 4 jump rings attach 4 of the 6010 Fuchsia pendants to the bottom holes in the Open Lotus, leaving the center hole free.  Using 3 jump rings make a chain, attach one end of the chain to the large pear fancy finding and the other to the center hole in the Open Lotus.  Using 3 small jump rings make a chain.  Attach one end to the large pear pendant component made in Step 3 and the other end to the center link in the cable chain.  Using 3 small jump rings make a chain and attach it to the top left hole in the Open Lotus.  Repeat for the right side and set aside.

Step 4:  Using the beading wire slide on one crimp bead and one lobster clasp. Crimp to close and add crimp cover.  Slide on one 5328 4mm Lt Topaz bicone bead, then in pattern slide on one 8mm 5040 Indicolite Briolette bead, one 4mm 5328 Fuchsia Bicone bead, one 6mm 5328 Lt Topaz Bicone bead, and one 4mm 5328 Fuchsia Bicone bead.  Repeat this pattern 4 times.  Now slide on one 8mm 5040 Indicolite Briolette bead, one 4mm 5328 Lt Topaz Bicone bead, one 6mm 5000 Fuchsia Round bead, and one 4mm 5328 Lt Topaz Bicone bead.  Repeat this pattern 5 times.  Slide on the Hourglass two hole link in top hole, then slide on one 4mm 5328 Lt Topaz Bicone bead, one 6mm 5000 Fuchsia Round bead, and one 4mm 5328 Lt Topaz Bicone bead, and one 8mm 5040 Indicolite Briolette bead, one 4mm 5328 Lt Topaz Bicone bead, one 6mm 5000 Fuchsia Round bead, and one 4mm 5328 Lt Topaz Bicone bead.  Slide on the other Hourglass two hole link in top hole.  Now reverse the pattern to bead the other side of the necklace.  Slide on a crimp bead and one jump ring and crimp to close.  Add crimp cover.

Step 5:  To attach the Pendant component made in Step 3:

  • Using a head pin slide on one 4mm 5328 Fuchsia Bicone bead and slide through the bottom hole of the Hourglass two-hole link on the left side of the necklace.  Make a simple loop and attach that to the jump ring chain on the left of Pendant component.  Repeat for the other side.
About DIY Dream Team

Our passion? Fuel your creativity for 40 years with unique jewelry-making courses.

Related Posts

Leave a Reply